Connecting The M-687.Un To The Protective Earth Conductor - PI M-687.UN User Manual

5 Installation
NOTICE
Heating up of the M-687.UN during operation!
The heat produced during operation of the M-687.UN can affect your application.
 Install the M-687.UN so that your application is not affected by the dissipating heat.
NOTICE
Unsuitable cables!
Unsuitable cables can cause damage to the controller and affect the performance of the
M-687.UN.
 Only use genuine PI parts to connect the M-687.UN to the controller.
 If you need longer cables, contact our customer service department (p. 35).
INFORMATION
When moving the platform in a power off state manually, differences in the holding force may
be noticeable across the travel range.
There are mechanical reasons for fluctuations in the holding force and they have no influence
on the function of the XY stage.
5.2

Connecting the M-687.UN to the Protective Earth Conductor

INFORMATION
 Pay attention to the applicable standards for connecting the protective earth conductor.
INFORMATION
 If there is any vibration in your application, secure the screw connection for the protective
earth conductor in a suitable manner (e.g., with conductive liquid adhesive) to prevent it
from unscrewing by itself. If this is not possible, check the screw connection at regular
intervals and retighten the screw if necessary.
16 Version: 1.3.0 MP100E M-687.UN XY Stage