Arrow Storage Products ED108 Owner's Manual & Assembly Instructions page 40

Step 12
X25 ctr
(20)
1
Lift and fasten a right and left
gable, under angle at corner, to
the rear wall angle
screws.
Hint: On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave
out 2 screws closest to center
gable leg.
2
Join the left and right gables
together with a gable brace using a
bolt and nut in the bottom hole
only.
3
Repeat Steps 1 & 2 for the door
track on the front of building,
except for the track supports,
fasten as shown.
� Parts Needed
For �
Gables/Braces
(5)
with
STEP
1
Gable
26
� Left Gable Assemblies (2)
� Right Gable Assemblies (2)
� 6635 Gable Brace (2)
6635 Gable Brace
STEP
2