Table of Contents
Advertisement
Quick Links
Owner's Manual & Assembly Instructions
ED01
Model No. ED108
723710717
Storage Area:
74 Sq. Ft.
6,9 m
BUILDING DIMENSIONS * Size rounded off to the nearest foot
*Approx.
Size
10' x 8'
121" x 92 3/4"
3,0 m x 2,3 m
307,3 cm x 235,6 cm
WR108
ED108BS
ED108L
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or
assist@arrowsheds.com
Do not return to dealer, they are not
equipped to handle your requests.
470 Cu. Ft.
2
13,3 m
3
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
123 1/4"
313,1 cm
ED108LG
ED108SB
ED108T
ED108Z
VDGY108
Depth
Height
95 1/4"
82 1/8"
241,9 cm
208,6 cm
SBVD108 A
WR108EU
VD108EU A
VDGY108EU
697.68618
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS
PIECES TO AVOID A MISHAP. FOR SAFETY SAKE,
PLEASE READ SAFETY INFORMATION PROVIDED IN
THIS MANUAL BEFORE BEGINNING CONSTRUCTION.
WEAR GLOVES WHEN HANDLING METAL PARTS.
Interior Dimensions
(Wall to Wall)
Width
Depth
Height
118 1/4"
90"
80 7/8"
300,4 cm
228,6 cm 205,4 cm
VD108 A
Door
Opening
Width
Height
55 1/2"
69 1/4"
141,0 cm
175,9 cm
Advertisement
Table of Contents
Related Manuals for Arrow Storage Products ED108
Summary of Contents for Arrow Storage Products ED108
- Page 1 Owner's Manual & Assembly Instructions ED01 Model No. ED108 ED108LG SBVD108 A WR108 ED108SB WR108EU ED108BS ED108T VD108 A ED108L ED108Z VD108EU A VDGY108 VDGY108EU 697.68618 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to dealer, they are not equipped to handle your requests.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Instructions are supplied in this manual and contain all Assembly Instructions: appropriate information for your building model.
- Page 4 steps show how to join related parts to make larger sub assemblies which will be used later. •Familiarize yourself with the hardware and fasteners for easier use during construction. These are packaged within the carton. Note that extra fasteners have been supplied for your convenience.
- Page 5 PLAN AHEAD..Be sure the day you select to install your building is dry and Watch the Weather: calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Whenever possible, two or more people should work together to Teamwork: assemble your building.
- Page 6 •Before you begin the first steps in assembling your parts, a base should be constructed and an anchoring system should be ready to use.
- Page 7 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 9 CARE & MAINTENANCE..For long lasting finish, periodically clean and wax the exterior surface. Touch-up Finish: scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 10 ACCESSORIES..ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. AFTER BEFORE ANCHOR KITS MODELS FB47410, FB5465, Model No. AK4 Anchor Kit contains heavy-duty FB106-A FB109-A and steel augers, 60' (18 m) of steel...
- Page 11 ers and a small tool holder for screwdrivers, pliers, etc. Holders slide along channel for fully adjustable spacing. Great for garage, basement, or the back of any door. Fits all Arrow Model No. SS404 Model No. SS900-B • Grey color •...
- Page 12 ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is offering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2...
- Page 13 Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an effective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.).
- Page 14 4. Construct a wood frame using four planks of 1x4 (19 mm x 89 mm) lumber. 5. Pour in concrete to fill in the hole and the frame giving a total of 4" (10,2 cm) thick concrete. Be sure surface is level. Note: Finished Slab dimensions, with lumber removed.
- Page 15 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. (Model No. AK4 or Anchoring into Wood/Post: Arrow Anchoring Kit: Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 60298) Recommended for use with any suggested mm) dia.
- Page 17 Hardware BB11ctr Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 65103 Black Screw (8) #8-32x3/8" (10 #8Ax5/16" (8 Bolt (145) Screw (324) #8-32 Hex Nut (Packed with (145) Screws) 66646 5971 66045 Washer (212) 67293...
- Page 18 6228 Track Support...
-
Page 19: Table Of Contents
Parts List ED12 Assembly Part Part Quantity Check Key No. Number Description in Carton List 8934 Ramp 9367 Front Floor Frame 8936 Rear Floor Frame 9338 Right Rear Wall Angle 9366 Door Track 5287 Splice Post 9339 Left Rear Wall Angle 6001 Left Gable 6000... -
Page 20: Key No
Assembly by Key No. ED13 30 34 21 14 16 10... -
Page 21: 8934 Ramp
� 8934 Ramp (1) � Parts Needed For � Step 1 � 9367 Front Floor Frame (2) � 8936 Rear Floor Frame (2) Floor Frame Assemblies G14 ctr � 9203 Side Floor Frame (4) (13) 9367 The front floor frame is made up of three pieces. - Page 22 91 1/8" 231,5 cm 91 1/8" 231,5 cm 119 3/8" 303,2 cm Front & Rear 119 3/8" 303,2...
-
Page 23: 9338 Right Rear Wall Angle
� 9338 Right Rear Wall Angle (1) � Parts Needed For � � 9339 Left Rear Wall Angle (1) Step 2 � 9340 Right Side Wall Angle (2) Frame Assemblies � 9341 Left Side Wall Angle (2) Y15 ctr The main frame pieces reinforce the walls. - Page 24 Side Wall Angles 89 7/8" 228,3 cm...
- Page 25 � Parts Needed For � Step 3 � 10470 Roof Beam Roof Beam Assemblies D16 ctr (30) 10470 The roof beams join the two gables and support the roof panels. The main roof beam is made up of four 10470 pieces overlapped back to back at the center.
- Page 26 233,4 cm Build two Single Beam Assemblies 91 7/8" 233,4 cm...
-
Page 27: 9366 Door Track
� Parts Needed For � � 6403 Door Track Splice Step 4 Door Track Assembly A17 ctr � 9366 Door Track (2) NOTE: Door Track Splice (painted part) The door track assembly supports the sliding doors and reinforces the front wall. It is made up of three pieces. - Page 28 VIEW CORRECT INCORRECT STEP...
- Page 29 � Front Floor Assembly � Parts Needed Step 5 � � Side Floor Assembly G18 ctr Floor Frame � Rear Floor Assembly RIGH REAR STEP Assemble the four corners of the floor frame using two screws at each corner as shown. At the front corners fasten bolts through from the bottom with nuts on top.
- Page 30 � 5288 Corner Post (4) � Parts Needed For � Door Track Assembly (1) Step 6 � Rear Wall Angle Assembly (1) � � Side Wall Angle Assembly (2) Y19 ctr Posts/Top Frames (22) NOTE The remainder of the building assembly requires many hours and more than one person.
- Page 31 wall angles overlap rear wall angle in corners.
-
Page 32: 5287 Splice Post
� Parts Needed For � � 5287 Splice Post Step 7 Splice Post/Door Jamb Y20 ctr � 7311 Door Jamb (12) The door jambs reinforce the door opening and provide an attractive trim. The splice post supports the 5287 wall. 5287 Position splice post at the... - Page 33 STEP 7311 Washer...
-
Page 34: 9365 Front Wall Channel
� Parts Needed For � � 9344 Siding Stud (6) Step 8 � 9365 Front Wall Channel Studs/Front Channel Y21 ctr The studs provide a surface for at- taching the siding panels. Following dimensions, measuring from the ends of angles, place a stud between each corner and splice post. - Page 35 DO NOT FASTEN TAB AT THIS TIME LARGE HOLE STEP...
-
Page 36: 8584 Side Siding
� Parts Needed Step 9 � 8584 Side Siding For � (12) Y22 ctr Side Siding Each screw and bolt in the wall requires a washer. CORRECT INCORRECT Slide side siding into STEP channels of corner and splice posts, flat edge upward, bottom edge down rest- ing on floor frame. -
Page 37: 8736 Rear Siding
� Parts Needed For Step 10 � 8736 Rear Siding � Y23 ctr � 8737 Front Siding Rear/Front Siding STEP STEP Fasten Top Center of Last Siding to Stud Slide rear siding into channel 8736 of corner and splice posts fastening to rear frame as 8736 shown in previous step. - Page 38 Jambs from the 8737 Inside...
- Page 39 □ Parts Needed For � □ 6000 Right Gable (2) Step 11 □ 6001 Left Gable (2) Gable Assemblies □ 5971 Roof Beam Bracket (4) Y24et ctr STEP Edge Trim (Plastic Piece) The gables go on top of the front and rear walls to support the roof beams.
- Page 40 � Left Gable Assemblies (2) � Parts Needed Step 12 � Right Gable Assemblies (2) For � � 6635 Gable Brace (2) X25 ctr Gables/Braces (20) Lift and fasten a right and left gable, under angle at corner, to rear wall angle with...
- Page 41 Track Supports 6228...
- Page 42 � Parts Needed � Main Roof Beam Step 13 For � Y26 ctr � Single Roof Beam Roof Beams STEP (12) Spread the two halves of the main roof beam and fasten the roof Single Roof Beam Assembly beam to the gable brace of the front gable.
-
Page 44: 8468 Right Roof Panel
□ Parts Needed For � Step 14 � 8468 Right Roof Panel (1) Right Roof Panel Y27et ctr STEP 8468 8469 Installing the roof panels is best done 7483 with a step ladder. Begin installing 7483 roof panels at the back right corner of the building. -
Page 45: 6529 Roof Panel
� 8468 Right Roof Panel (1) � 8469 Left Roof Panel (2) � Parts Needed Step 15 � 7483 Roof Panel (2) For � � 6529 Roof Panel (2) Y28 ctr � 8840 Ridge Cap (1) Roof Assembly STEP 8469 Left Roof (38) (23) Weather... - Page 46 NOTE If roof beam holes do not line up with the roof panel holes, shift the building from left to right. If this does not help, your building may not be level. Shim the corners until holes line up.
- Page 47 � 8486 Ridge Cap (1) � Parts Needed For � � 7483 Roof Panel (2) Step 16 � 8485 Left Side Roof Trim (2) Panels/Ridge Cap/Trim � 8836 Right Side Roof Trim (2) Y29 ctr STEP Install the second ridge cap overlapping the first ridge cap 8486 while installing the remaining roof...
- Page 48 STEP 8485 Roof Trim Cap STEP...
- Page 49 � 3719 Door Handle Brace � Parts Needed Step 17 � 10472 Right and Left Doors For � BB30 ctr � 10497 Horizontal Door Brace Door Assembly � 6301 Vertical Door Brace (2) (12) The steps on this page tell how to assemble the right door.
- Page 50 Door Brace Door Attach the lower door guides Washe and bolts as shown. Repeat steps 1 through 6 for 66382 STEP the left door. Guide...
- Page 51 � Parts Needed For � � Right Door Assembly Step 18 Door Installation & Adjustment A31ctr � Left Door Assembly Horizontal Door Gable Brace Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the front frame track.
- Page 52 Keep this Owner's Manual and Assembly Instructions for future reference.
- Page 53 ED108 ED108BS ED108SB ED108LG 697.68618 SBVD108 A ED108L ED108T ED108Z VDGY108EU VD108EU A VDGY108 WR108 WR108EU VD108 A ED32 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time.
Need help?
Do you have a question about the ED108 and is the answer not in the manual?
Questions and answers
price for door ramp #8934