Table of Contents
Advertisement
Step 6
Y19 ctr
(22)
NOTE
The remainder of the building
assembly requires many hours and
more than one person. Do not
continue beyond this point if you do
not have enough time to complete the
assembly today. A partially assembled
building can be severely damaged by
light winds.
The top frame pieces give rigidity
to the side walls and provide a
surface for attaching the gables
which sup- port the roof.
1
Position corner posts at the
corner of the floor frame as shown.
Fasten the corner post to the floor
frame with two screws.
Support the corner posts with
stakes or other devices until door
jambs are attached.
2
Fasten the door track assembly
(holes on top) behind the top of
the front corner posts using 1
screw in each corner. See the
figure.
3
Fasten the rear wall angle as-
sembly behind the top of the rear
posts using 2 screws in each post.
4
Fasten the side wall angles be-
hind the top of the side posts
using 2 screws in each corner. Side
� Parts Needed For
�
Posts/Top Frames
528
8
SID
E
528
8
STE
P
4
Side Wall
Angle
Assembly
936
6
21
� 5288 Corner Post (4)
� Door Track Assembly (1)
� Rear Wall Angle Assembly (1)
� Side Wall Angle Assembly (2)
REA
R
TOP
VIEW
FRON
T
Wall
Angles
Must Face
Inside
Building
STE
528
8
SID
E
STE
P
1
528
8
Short
Leg on
Top
STE
P
3
Rear Wall
Angle
Assembly
Side Wall
Angle
Assembly
Long
Leg On
Top
Openin
g Facing
In
Short Leg
on
P
Bottom
2
Advertisement
Table of Contents
