Table of Contents
Advertisement
Step 3
D16 ctr
(30)
The roof beams join the two gables
and support the roof panels. The
main roof beam is made up of four
pieces overlapped back to back at
the center. The left and right roof
beam assemblies are made up of
two pieces.
Hint:
These
pieces
fitted, so you may have to press
hard to join them together.
1
Place the end of one roof beam
inside a second roof beam so that
the six holes in each piece align.
Make four sets of roof beams by
repeating this procedure. Do not
insert bolts yet.
2
Take
two
of
the
together roof beams and join
them as shown to form the main
roof beam assem- bly. Hold the
assembly together and fasten with
14 bolts. Build only one Doubled
Beam Assembly.
3
Fasten the other two pressed-
together roof beams with eight
bolts to make the left and right
roof beam assemblies.
4
Double check the length of each
and set these pieces aside for later
use.
� Parts Needed For �
Roof Beam Assemblies
STEP
1
are
force-
pressed-
STEP
3
10470
ASSEMBLE
D END
STEP
VIEW
2
10470
10470
16
� 10470 Roof Beam
(8)
10470
Roof Beam 91 7/8"
233,4 cm
Build one Doubled Main Roof
Beam Assembly for Peak in Roof
10470
10470
91 7/8"
Advertisement
Table of Contents
