A10
Anchoring Down The Building
It is important that the entire floor frame be anchored after the building is erected.
Below are recommended ways of anchoring.
Arrow Anchoring Kit:
60298) Recommended for use with any suggested
base.
Contains: 4 Anchors with Cable, Clamps
and installation instruction.
Arrow Anchoring Kit:
68383) Recommended for use with the concrete
base.
Contains: Corner gussets, perimeter clips,
hardware, 1/4" masonary drill bit and installation
instruction.
Anchoring
(Model No. AK4 or
OVER THE BEAMS
AND INTO THE
GROUND
(Model No. AK100 or
Anchoring into Wood/Post:
Use 1/4" (6 mm) Wood Screws. There are 1/4" (6
mm) dia. holes provided in the frames for proper
anchoring.
1.
Anchoring into Concrete:
1. For poured concrete slab or footing or patio
blocks: Use 1/4" x 2" (6 mm x 51 mm) Lag Screws.
2. For Anchor Post of Concrete poured after
building is erected: Use 1/4" x 6" (6 mm x 152 mm)
Lag Screws.
11
2.