Table of Contents
Advertisement
3.2.3. Measure screen
Touch the icon
to enter measure page. Touch the icon
browse information. Touch the icon
icon
to go back to previous menu.
Measure screen page 1
LINE VOL: The real time value of R, S and T phase voltage, RS, ST, TR voltage
and input frequency.
INVERTER VOL: The real time value of R, S and T inverter voltage, RS, ST and
TR voltage and frequency.
R BYPASS VOL: The real time value of R, S and T bypass voltage, RS, ST and
TR voltage and frequency
OUTPUT VOL: The real time value of R, S and T output voltage, RS, ST and
TR voltage and frequency
Measure screen page 2
20
or
to
to return to main screen. Touch the
OUTPUT W: R, S and T output power in watt.
OUTPUT VA: R, S and T output power in VA.
OUTPUT W (%): R, S and T output power watt in percentage.
OUTPUT VA (%): R, S and T output power VA in percentage.
Total watt and VA: W(%)/Total VA(%): Total input load watt and VA in
percentage.
BATT Voltage/Bus Voltage/Charging Current/Discharging Current: The real
time value of DC related information.
Temperature: Temperature of R, S and T phases.
Measure screen page 3
INPUT W: R, S and T input power in watt.
INPUT VA: R, S and T input power in VA.
INPUT W (%): R, S and T input power watt in percentage.
INPUT VA (%): R, S and T input power VA in percentage.
Total W(%)/Total VA(%): Total input load watt and VA in percentage.
Input current: The real-time value of input current in R, S and T phases.
Output current: The real-time value of output current in R, S and T phases.
Input PF: The real-time value of input power factor in L1, L2 and L3 phases.
Output PF: The real-time value of output power factor in R, S and T phases.
3.2.4. Setting screen
This sub-menu is used to set the parameters of UPS. Touch the icon
setting menu page. There are 2 options: Basic and Advanced. Touch the icon
to return to main screen. Touch the icon
NOTE!
Not all settings are available in every operation mode. If the setting is not
available in present mode, the LCD will keep its original setting parameter showed
instead of changing the parameters.
to enter
to go back to previous menu.
21
Advertisement
Table of Contents
