Table of Contents
Advertisement
Battery test
It will show "Battery Test" if the UPS is not in test. Touch "Yes" to start
battery test. Then, it will show "Battery testing....." during battery test period.
After few seconds, battery test result will show on the screen. Touch "Back"
to return to main screen immediately or "No" to cancel this operation and
back to main screen. It will show "Cancel battery test" if the UPS is in test.
Battery Test
Audio mute
It will show "Mute all" if the audio is active. Touch "Yes" to activate mute. If
"Mute all" is active, it will show
screen. Touch "Back" to return to CONTROL screen immediately or "No" to
cancel this operation and back to CONTROL screen.
It will show "Cancel Mute All" if the UPS is mute already. Touch "Yes" activate
audio function or "No" to keep mute. Touch "Back" to return to CONTROL
screen.
Mute All
18
Cancel Battery Test
icon on the top left corner of the main
Cancel Mute All
ON/OFF Charger
It will show "Turn on Charger?" when charger is off.
It will show "Turn off Charger?" when charger is on.
Touch "YES" to turn on or off the charger. Then, the screen will return to
main screen.
Touch "Back" to return to CONTROL screen immediately or "No" to cancel
this operation and back to CONTROL screen.
Turn on Charger
EXIT PARALLEL
In the case of multiple machines in parallel, clicking this option will pop up
the "Exit and?" interface;
Click "Yes" to exit the machine from the current parallel system;
Click "No" to cancel this operation and return to the operation interface.
In the case of a single machine, clicking this option will pop up the "This
setting cannot be made in this mode" interface.
EXIT PARALLEL?
Turn off Charger
This setting cannot be made in this mode!
19
Advertisement
Table of Contents
