Parental Settings Menu Operation; Timers; Setting Sleep Timer; Setting Programme Timers - Luxor LX9412662M Operating Instructions Manual

Parental Settings Menu Operation

• Select an item by using "
• Use " " or " " button to set an item.
• Press OK button to view more options.
Menu Lock: Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work, except for the
Standby Off/On button. When Child Lock is activated
you are able to switch the TV into Standby mode with
the Standby Off/On button. To switch the TV on again,
you need the remote control. Hence, if one of those
buttons is pressed, Child Lock Is On will be displayed
on the screen when the menu screen is not visible.
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verification
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.

Timers

To view Timers menu, press MENU button and select
Settings icon by using " " or " " button. Press OK
button to view Settings menu. Use " " or " " button
to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular
programme using this feature.
" or " " button.
" or " " button.
English - 96 -
Press " " button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.

Adding a Timer

• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes network type by using " " or " ".
Timer Type: You can select timer type as Record
or Timer.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
C h a n g e / D e l e t e : S e t s t h e c h a n g e / d e l e t e
permission.
Playback: Sets the playback permission and parental
settings.
• Press GREEN button to save the timer. Press RED
button to cancel.
Change/Delete:Controls parental settings on timers.

Editing a Timer

• Select the timer you want to edit by pressing "
or " " button.
GREEN button. Edit Timer menu screen will
• Press
be displayed.
• When finished with editing, press
save. You can press MENU button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing "
" or " " button.
• Press RED button.
• Select YES by using " " or " " buttons to delete the
timer. Select NO to cancel.
"
GREEN button to