Nokia IP350 Appliance Installation Manual page 79

unsetenv
Use the
the following syntax:
unsetenv name
where name is the name of the variable to be cleared.
For example, the following command clears the boot-file variable:
Note
This command sets the autoboot variable to no, and the bootwait
variable to zero.
set-defaults
Use the
values. The command has the following syntax:
set-defaults name
where name is the name of the variable to be set to its factory default. If name
is not specified, all variables are set to their factory defaults.
For example, the following command sets the value of autoboot to be yes, the
factory default:
BOOTMGR[2]> set-defaults autoboot
setalias
Use the
syntax:
setalias name device
where name is the alias name, and device the device for which name is the
alias.
IP350 and IP380 Appliance Installation Guide
All manuals and user guides at all-guides.com
command to clear a particular variable. The command has
unsetenv
BOOTMGR[2]> unsetenv boot-file
command to set variables to their factory-default
set-defaults
command to set an alias. The command has the following
setalias
Variables
79