Enamelled Domestic Hot Water Tanks - Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual

4.8.1.2 Enamelled domestic hot water tanks

With their generously dimensioned heating surfaces for increased heat transfer, the enamelled hot
water tanks are optimally suited for combination with Aquarea heat pumps. They are all equipped
with a sacrificial anode for improved protection against corrosion and reach a maximum supply
water temperature of 95 °C.
PAW-TA15C1E5STD / PAW-TA20C1E5STD / PAW-TA30C1E5STD /
PAW-TA40C1E5STD
PAW‑TA15C1E5STD
Components
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
PAW‑TA20C1E5STD PAW‑TA40C1E5STD
PAW‑TA30C1E5STD
A B
1
2
3
4
5
6
7
8
9
PAW‑TA15C1E5STD
With their generously dimensioned heating sur-
faces for increased heat transfer, the enamelled
hot water tanks are optimally suited for combi-
nation with Aquarea heat pumps.
PAW-TA15C1E5STD has a capacity of 150 lit-
res, no electric tank heater and is suitable for
floor-standing or wall-mounted installation.
The other three tanks have capacities of 200,
300 and 400 litres respectively, an electric tank
heater with flange connection in the lower tank
area, and they can only be installed standing in
vertical position.
A Internal view (seen from front side) for floor-standing
installation
1 Water piping connections on top side
2 Immersion tube for control
3 Sacrificial magnesium anode
4 Heat insulation
5 Hot water tank
6 Heat exchanger coil
7 Floor
B External view (seen from left side) for wall‑mounted
installation
4 Heat insulation
8 Wall
9 Water piping connections on bottom side
Product Description
75
4