Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual page 205

Menus
Menu
2 System check
2.1 Energy monitor
Present or historical chart of
energy consumption, generation
or COP�
• COP= Coefficient of Performance.
• For historical chart, the period is selected from 1 day/1 week/1year�
• Energy consumption (kWh) of heating, *
retrieved�
• The total power consumption is an estimated value based on AC 230 V and
may differ from value measured by precise equipment�
2.2 System information
Shows all system information in
each area�
2.3 Error history
• Refer to Troubleshooting for
error codes�
• The most recent error code is
displayed at the top�
2.4 Compressor
Shows the compressor
performance�
2.5
Heater
Total hours of ON time for
Room heater/Tank heater�
3 Personal setup
3.1
Touch sound
Turns the operation sound ON/
OFF�
3.2
LCD contrast
Sets the screen contrast�
* The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�
1
* Only displayed when COOL mode is unlocked (This means when COOL mode is available)�
2
22
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
For user
Default Setting
Present
Select and retrieve
Historical chart
Select and retrieve
* cooling, tank and total may be
1, 2
Actual system information of 10 items:
Inlet / Outlet / Zone 1 / Zone 2 / Tank /
Buffer tank / Solar / Pool / COMP
frequency / Pump flowrate
Select and retrieve
Select and retrieve
Select and retrieve
Select and retrieve
ON
3
Setting Options / Display
Appendix
8
205