Toshiba MMK-UP0271HP Series Service Manual page 136

No. Part name
Vertical louver 1) Follow the procedure item 3 and 7 .
8
assembly
2) Remove fixing screw from the vertical louver
Fan motor
1)
9
2)
3)
4)
<To re-installation>
Procedures
set then remove them from the body back.
Follow the procedure item 3 , 7 and 8 .
Loosen the set screw of the cross flow fan.
Remove 2 fixing screws of the motor band.
Pull the motor band and the fan motor
outward.
- Keep connector position and arrange fan
motor wires follow figure.
Motor band
Fan motor connector
Fan motor wires
Cross flow fan
Screws
Fan motor connector must not
contact the Motor band
- 136 -
Remarks
Vertical louver set
Screw
Hexagon screw driver
Fan motor
Motor band