Toshiba MMK-UP0271HP Series Service Manual page 133

No. Part name
Electric part
4
box assembly
<To re-installation>
Procedures
1) Follow the procedure item 3 .
2) Remove screw holding the electric part cover
then remove fixing screw of base camp and
remove it.
TA sensor
1
Earth line
TCJ sensor
(exists a tube)
TC sensor
(no tube)
3) Disconnect the connectors for the fan motor
and louver motor from P.C.board assembly.
4) Remove the earth screw and earth line from
evaporator.
5) Pull out TC sensor and TCJ sensor from
sensor holder of the evaporator.
Earth screw
Earth line
Washer
6) Remove TA sensor from the evaporator.
7) Remove the 2 fixing screws that secures the
electric parts box assembly, unit display
assembly and remove the electric parts box
assembly.
- The sensor, earth line must turn to down.
TCJ sensor
(exist a tube)
TA sensor
TC sensor
(no tube)
Earth line
2 3
Fan motor
U3 U4 A B connector
Louver motor
connector
TC sensor or
TCJ sensor
Sensor holder
- 133 -
Remarks
Base clamp
Screw Screw
Electric part cover
Electric parts box
Unit display
Screws
Connectors