Renault ESPASE 2005 Manual page 62

TRIP COMPUTER AND WARNING SYSTEM
Trip mileage recorder reset
buttons 2
To reset the trip mileage recorder,
select the Trip mileage recorder
display, then press key 2 until the
recorder is reset.
Trip parameters reset buttons 2
With one of the trip parameters
selected on the display, press button 2
until the display resets.
Interpreting some of the values
displayed after resetting
The values showing average fuel
consumption, range and average
speed will become more stable and
reliable the further you travel since
the last time the reset key was
2
pressed.
For the first few miles after pressing
the reset key you may notice:
- That the range increases as you
travel.
This is normal;
consumption may decrease when:
- the vehicle stops accelerating,
- the engine reaches its operating
temperature (engine cold when
reset key pressed),
- when you drive from a built up
area on to the open road.
(continued)
average fuel
- You may also notice that the
average fuel consumption
increases when the vehicle is
stationary and the engine idling.
This is normal since the computer
takes account of fuel used during
idling.
Automatic resetting
journey parameters
A reset is automatic when the
maximum value for any of the
parameters is exceeded.
of the
1.53