Table of Contents
Advertisement
Firmware Download Utility
F
IRMWARE
The Firmware Download Utility is a separate program and is
not available from the console screen menus.
This section describes the ETSI Firmware Download utility and how to use it
to upgrade the HDSL card firmware. The utility is a program you can run on
a PC to download new firmware to the LTU or NTU by connecting a standard
RS-232 interface cable to the unit front panel V.24 console port. When using
the ETSI Firmware Download utility, follow these rules:
•
Make sure the destination unit where the new firmware is to be upgraded
is correct before pressing the
•
Do not disconnect the interface cable during the download process.
•
Do not abort the download once it has started.
Figure 40
below shows the menu for the ETSI Firmware Download Utility.
The upper area of the utility menu displays the configuration options, and the
lower area displays messages during the download process.
Figure 40. ETSI Firmware Download Utility Menu
66
D
OWNLOAD
ENTER
February 15, 2001
LTPE-UG-1017-01 Issue 1
U
TILITY
key.
UTU-731 List 1 and UTU-732 List 1
Advertisement
Table of Contents
