Table of Contents
Advertisement
System Configuration
Config Menu Options
Press
C
at the console screen to display the Config menu
below lists the Config menu options and the suggested order of system
configuration.
Table 7. Config Menu Options and Order of System Configuration
Use this Option
Terminal Settings
Date and Time
Password
Circuit ID
System Settings
LTU and NTU
Interface
Alarms
Set to Factory Dflts
22
Figure 9. Console Screen Config Menu
To:
Select the best viewing mode for the console screen.
Set the system date and time.
Set or change the system password.
Assign a circuit ID.
Select and configure system-wide operating
parameters.
Select and configure LTU/NTU-specific operating
parameters.
Enable or disable alarms and select alarm severity.
Reset all operating parameters to factory settings.
February 15, 2001
LTPE-UG-1017-01 Issue 1
(Figure
UTU-731 List 1 and UTU-732 List 1
9).
Table 7
See page:
23
24
25
26
27
29
33
38
Advertisement
Table of Contents
