System Configuration
Set to Factory Defaults
Set to Factory Dflts is the screen from which all operating options can be reset
to the ADC factory defaults.
1
Press
F
screen
(Figure 21
ENTER
2
Press
confirmation message appears at the bottom of the display:
SETTING FACTORY DEFAULTS ... SERVICE *WILL* BE
INTERRUPTED! ARE YOU SURE(Y/N)?
38
at the Config drop-down menu to display the Set to Factory Dflts
below).
Figure 21. Set to Factory Dflts Screen
to reset the UTU configuration to factory defaults. A
February 15, 2001
LTPE-UG-1017-01 Issue 1
UTU-731 List 1 and UTU-732 List 1