LTPE-UG-1017-01 Issue 1
Configure System Settings
Use the System Settings menu to select and configure system-wide operating
parameters. Configure the system settings as follows:
S
1
Press
Settings menu.
UTU-731 and UTU-732.
2
Do the following for each system option setting to be changed.
on page 28
System Settings menu. The settings in boldface type are factory default
settings.
•
Use the
•
Use the
correct information, then press
When using a UTU as an LTU, configure the Local Unit Role
option first.
UTU-731 List 1 and UTU-732 List 1
at the Config drop-down menu to display the Config System
Figure 14
shows the Config System Settings menu for the
Figure 14. Config System Settings Menu
describes the fields and options displayed in the Config
↑
or the
↓
key to select the submenu item to be changed.
SPACEBAR
to toggle to the appropriate option or type in the
February 15, 2001
ENTER
to select the option.
System Configuration
Table 8
27