Replacing A T/H Sensor - Huawei NetCol8000-C070 User Manual
In-room chilled water smart cooling product
Hide thumbs
Also See for NetCol8000-C070:
- User manual (236 pages) ,
- Quick manual (32 pages) ,
- Quick manual (22 pages)
Table of Contents
Advertisement
NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
6.4.10 Replacing a T/H Sensor
Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Open the front door.
Step 3 Remove the cable terminals from the ports on the T/H sensor.
Step 4 Pull out the T/H sensor in the direction.
Figure 6-32 Replacing aT/H sensor (upflow)
Issue 07 (2021-12-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 Maintenance
187
Advertisement
Table of Contents
