Huawei NetCol8000-C070 User Manual page 244

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Menu
Issue 07 (2021-12-30)
Name
Humidity setpoint
Return-air sensor
Cold aisle sensor
Hot aisle sensor
Heating function
Copyright © Huawei Technologies Co., Ltd.
Parameter Description
After the temperature and
humidity control type and
the humidity value under
this type are set, the device
performs humidifying or
dehumidifying based on
the settings.
The sensors on the return
air side are set to Enable.
The sensors in cold aisles
can be set to Enable or
Disable.
The sensors in hot aisles
can be set to Enable or
Disable.
If Enable is selected, the
electric heater can be
started when the ambient
temperature is lower than
the temperature setpoint
by a certain range. If
Disable is selected, the
heating function is
disabled. If Enabled when
active power is selected,
the electric heater can be
started only when the
active power supply is used
and the ambient
temperature is lower than
the temperature setpoint
by a certain range.
E Parameter Description
Default Value
50.0%RH
Enable the
corresponding
humidity and
temperature
sensor
installed on
the return air
side.
Disable
Disable
Enabled when
active power
234