Product Features - Cary Audio Design Cinema 11 Owner's Manual

WELCOME

PRODUCT FEATURES

More than just an audio control center, the Cinema 11 features the latest version of CES 7.1
decoding, which derives 7.1 channel output from stereo, 5.1 and 6.1 channel sources. Unlike
other decoders, CES 7.1 is compatible with all input sources and requires no special encoding.
Because the improvement it provides is clearly audible, CES 7.1 decoding is widely regarded as
the finest available.
In addition to CES 7.1, the Cinema 11 is also equipped with Dolby Digital Surround EX, Dolby Pro
Logic II, Dolby Pro Logic IIx, dts 96/24, dts NEO:6, and dts-ES decoding.
With 32-bit audio digital signal processing (DSP) engines, the Cinema 11 offers unparalleled
processing power. These DSP engines perform custom Cary Audio processing such as auto sound
setup system, CES 7.1 decoding, bass enhancement, dialog enhancement, bass management,
high-precision digital crossover, and room EQ. This processing is available at sample rates up to
192 kHz, with 24-bit resolution to retain top performance from all input sources and listening
modes. A DSP engine is dedicated to decoding multi-channel compressed audio sources.
10 channels 24-bit/96 kHz A/D converters can be used to convert stereo analog audio input and
7.1 analog audio input signals to digital signals, allowing the Cinema 11 to provide the benefits of
precise digital signal processing without sacrificing signal integrity. Alternatively, stereo analog
XLR or 7.1 bypass signals and 7.1 analog signals can bypass A/D conversion and internal
processing to remain in the analog domain straight to the output connectors.
The Cinema 11 offers:
• 8 inputs; one balanced and seven single ended with RCA connectors; including S/PDIF
coaxial, S/PDIF optical, and analog pairs
• 7.1 channel analog audio input connections
• Analog bypass option for stereo and 7.1 channel analog audio input connectors
• Auto switching between digital and analog audio input connectors
• 24-bit/192 kHz D/A converters for all Main Zone audio channels
• Automatic and manual calibration of speaker distances and output levels
• 32-bit DSP engines
• CES 7.1 decoding
• Dolby Digital Surround EX, Dolby Pro Logic IIx and Dolby Pro Logic II decoding
• dts 96/24, dts-NEO:6 and dts-EX (discrete and matrix) decoding
• RS-232 connector for flash memory software upgrades and configuration tool downloads
• Optical digital audio output connector for Zone 2 (Toslink)
• 3 12 volt output connections with 1/8" mini plug connectors
• 2 IR input connections
• XLR microphone input connections
• 7.1 Balanced audio output connectors for Main Zone
6