Cary Audio Design Cinema 11 Owner's Manual page 28

AUTO SOUND SETUP
SL ............................... Inphase
SW.............................. Inphase
Storing Measurement Results in SETUP MENU
If the Cinema 11 senses that a speaker is out of phase, the VFD will show the following
sentence only and won't continue..
- Correct out phase SPK
- Run Auto Setup again (press Enter)
If the Cinema 11 senses all speakers are In Phase, it will go to the next step.
- Press ENTER restore to Setup Menu
Press the ENTER button to store all parameters including the equalizer parameters in the
SETUP MENU. If you do not want to store the calculation results in the SETUP MENU,
press the TEST button to exit.
Inphase / Outphase
Inphase / Outphase
27