Zone 2 - Cary Audio Design Cinema 11 Owner's Manual

SETUP MENU

ZONE 2

Cinema 11's front panel and main remote handset can control ZONE 2 output sources and
volume control in the SETUP MENU.
- Zone 2
- Zone 2 input
- Zone 2 volume
To set Zone 2 input:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / SPEAKER appears.
2. Press the button until INPUT is selected.
The SETUP MENU/ INPUT menu appears.
3. Press the button until RADIO is selected.
4. Press the button until ZONE 2 is selected.
5. Press the ENTER button to enter the ZONE 2 INPUT menu.
6. Use the and
You can select INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7,
INPUT 8, 7.1CH ( L & R ONLY) AM and FM.
7. Press the button to select GOTO MAIN MENU and press the ENTER to return to the
ZONE 2 menu, or press the SETUP button to exit the SETUP MENU.
To set ZONE 2 volume:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / SPEAKER appears.
2. Press the button until INPUT is selected.
The SETUP MENU/ INPUT menu appears.
3. Press the button until RADIO is selected.
4. Press the button until ZONE 2 is selected.
5. Press the ENTER button to enter the ZONE 2 INPUT menu.
6. Press the button until ZONE 2 VOLUME is selected.
7. Use the and
You can adjust the zone 2 volume level from -90dB to +15dB.
8. Press the button to select GOTO MAIN MENU and press the ENTER to return to the
ZONE 2 menu, or press the SETUP button to exit the SETUP MENU.
buttons to select the zone 2 input sources.
buttons to select the zone 2 output volume.
41