Cary Audio Design Cinema 11 Owner's Manual page 18

CONTROLS AND DISPLAYS
10. AUTO SETUP MIC-IN
• Use to connect the supplied microphone for Auto Setup and Auto Room EQ functions
to work.
11. RS-232 PORT
• The RS-232 port is used in conjunction with an external controller to control the
operation of the Cinema 11 by using an external device. (
12. SYSTEM-LINK PORT
• Use this port for upgrade use only.
13. ZONE 2 DIGITAL AUDIO OUT (TOSLINK OPTICAL)
• These jacks supply the digital audio outputs to an external surround sound processor
used to power the speakers in the remote zone.
14. DIGITAL INPUT (INPUTS 2 THROUGH 8) TOSLINK OPTICAL
• The digital inputs accept digital audio signal from a compact disc, DVD or other digital
source component.
15. DIGITAL INPUT (INPUTS 2 THROUGH 8) RCA COAXIAL
• The digital inputs accept digital audio signal from a compact disc, DVD or other digital
source component.
16. DIGITAL INPUT (INPUT 1) XLR
• This balanced digital input accepts digital audio signals from a compact disc, DVD or
other balanced digital source component.
17. AM ANTENNA TERMINALS
• Use to connect indoor or outdoor antennas for radio broadcasts.
18. FM ANTENNA TERMINALS
• Use to connect indoor or outdoor antennas for radio broadcasts.
custom installation use only
(reserved for future use)
17
)