Film Loading Procedure - AGFA Drystar AXYS XL User Manual

86 | Drystar AXYS XL | Basic Operation (operator mode)

Film loading procedure

1. Open the empty input tray.
2. The printer is ready to receive a new film when the following message
appears:
3. Remove the white cover sheet.
4. Take film pack, and open it.
3752B EN 20210601 1655
WARNING:
To avoid possible film jams, make sure to open input tray all
the way.
Note: Verify that the film type on the film pack corresponds
with the sticker on the tray! If you do use an other film type,
you are advised to change the label on the tray.