Table of Contents
Advertisement
Once mounted and hardware is tightened, you are ready to fasten the open side of the Fresh Air Inlet
to the 8" diameter hose.
Upon completion, you will now have fresh, clean air from outside your vehicle used to cool the
EACH TIME YOU UTILIZE YOUR BLOWING MACHINE
1. Obtain appropriate protective equipment.
2. Attach hose to machine outlet using a hose clamp.
3. Open slide gate & place pin in desired opening.
T: 303-833-6644
Original Language - English
VANGUARD engine.
Slide gate shown in the closed position
Instruction Manual
www.inteccorp.com
|
8
Advertisement
Table of Contents
