Charging Instructions - Fiido Beast Manual

2.4 Charging instructions

The battery comes with a small amount of electricity, before the first time use, please make sure to charge
it to full power before riding.
Charging
1. Charging connection: Connect the charging interface to the charging port, then connect the power plug to the
power socket.
2. Fully charged：When the indicator light of the charger is red, means it's normal charging. When the light is green,
means it's fully charged.
3. Charging time：Charging time is around 13 hours, The duration depends on the situation.
4. Disconnect charging：When the indicator light turns green, means it's fully charged.Slightly switch the safty lock，
then unplug the power plug , then remove the charging interface from the battery. Close the battery cover.
5. Charging ways: The E-scooter supports two charging ways：Charging direclty or taking out the battery to charge.
Please see P13 for how to remove the battery.
Caution: Charger has high voltage , DO NOT repair without permission. In order to avoid danger, battery and
charger should be placed away from children, inflammable and explosive objects (such as car seat
cushions, sofas, etc.). Keep the battery in a ventilated and dry place, and make sure NOT to charge
in open-air place to avoid electrical short circuit fire and other accidents caused by rain and other
factors. And to prevent liquid and metal particles insert into the electrical parts.
Danger: Charging can be allowed to use public charging equipment, but the matching between the bettery
and the charging equipment should be fully considered.
Warning: If there's any odor or high temperature during charging, please stop charging immediately and
contact after-sales team for assist.
14