Fiido Beast Manual page 15

Step 4：Mode choosing
① Gear switch：Before starting riding, please choose gear 1 for the safety consideration, later you can
switch the gear according to the cycling road conditions and your own needs.
Gear 1 is the ECO mode, which provides lower power/speed (1-15km/h)
Gear 2 is the standard mode, which provides medium power/speed (1-20km/h)
Gear 3 is the sport mode, which provides stronger power/speed (1-25km/h)
② Drive switch: The scooter automatically defaults to rear motor drive mode . During riding, you can
press the rear/dual drive motor button in the throttle to switch the mode according to the riding road
conditions or your own requirements.
Step 5：Braking introduction
The left side is front brake, the right side is rear brake. While riding, it's recommended to use the rear
brake first, then the front brake to slow down the speed to stop, Do not abruptly brake on the front brake,
as this could cause the scooter to topple and crash.
（Caution:Lean your weight towards the turnning direction and slow down the speed .）
11