First Ride - Fiido Beast Manual

2.2 First ride

Before first ride, please follow the installation guide to install components properly, check all the screws are well
tightened, ensure sufficient power and wear protective gears.
Step 1：Adjust the stem
Please check whether the handlebar quick-release screw is tighted whether the handlebar angle is 90°
with the stem.
(Cautions：Please make sure the stem is tightened and stem quick release is in closed status, otherwise there are security risks.)
Step 2：Turn on the power
Input the six-digit password then click the power button, to turn on the scooter power.
(more detail pelase check P-12）.
9