Factory Default; Gnss Monitoring; Rtcm Monitor - NSR Marine NGR-1000 User Manual

NGR-1000/NGR-3000 USER MANUAL

6.2.4 Factory Default

FACTORY DEFAULT is to return the system to factory default setting.
Select FACTORY DEFAULT item in DIAGNOSTICS menu, then click [YES].
NOTE:
The navigation settings and GPS settings will restore to factory default while the waypoints
and routes registered remain unchanged.

6.2.5 GNSS Monitoring

It's to check the GNSS data appearing on output ports.

6.2.6 RTCM Monitor

RTCM can be set ON or OFF. When set ON, DGPS beacon input will be checked by NGR-
1000/NGR-3000.
NGR-1000/NGR-3000 UM.E 20190331-04
31