Baud Rate Setting - NSR Marine NGR-1000 User Manual

NGR-1000/NGR-3000 USER MANUAL
GSA: GNSS receiver operating mode, satellites used in the navigation solution reported by
the GGA 2148 or GNS sentences, and DOP values.
RTE：Waypoint identifiers, listed in order with starting waypoint first, for the identified route.
BWC：Bearing and distance to waypoint – Great circle
RMB：Recommended minimum navigation information
XTE： Cross-track error, measured
WPL：Latitude and longitude of specified waypoint.
NOTE: As default, GNS, GBS, GGA, RMC, VTG, ZDA and DTM are selected.

7.4.2 Baud Rate Setting

Select each of four outputs to configure the baud rate.
Default baud rate of all ports is 4800bps.
Move the cursor to the output and click it continuously until a desired rate is shown.
1) The baud rate can be selected among 4800/ 9600/ 19200/ 38400bps.
2) The NMEA Version can be selected among 1.5/ 2.0/ 2.3/IEC61162 Ed4/IEC61162 Ed5.
NGR-1000/NGR-3000 UM.E 20190331-04
36