Table of Contents
Advertisement
LTPH-SM-1014-03, Issue 3
Setting the HMU Date and Time (Option H)
Setting the HMU date and time will globally configure these parameters for all HLU-319s in the
system. The HMU-319 List 7A will also globally update the time and date settings for the HXUs
in the chassis.
Step
Procedure
1
Press
H
and then press
2
At the prompt, enter the current date using MM/DD/YY format, and then press
3
At the prompt, enter the current time using HH:MM 24-hour format, and then press
X
4
Press
to exit the screen and return to the Shelf Status menu.
5
Proceed to
"Setting the Shelf Identifier (Option D)" on page
? ? ? ?
Installer Signature
Setting the Shelf Identifier (Option D)
Step
Procedure
1
From the Shelf Options menu, press
2
At the prompt, enter a text string of 32 alphanumeric characters or less to identify the shelf, and then
press
ENTER
.
The Shelf Identifier may be set to any value, but must be unique for each shelf in the network.
3
Press
X
to exit the screen
Y
4
Press
to confirm, save the setting, and return to the Shelf Status menu.
5
Proceed to
"Setting the Local IP Address (Option A)" on page
? ? ? ?
Installer Signature
HMS-358 List 1 and List 2
ENTER
to select Change HMU Date and Time.
D
and then press
.
January 12, 2001
ENTER
ENTER
35.
ENTER
to select Shelf ID.
36.
Installing a Management Unit (HMU)
Installer Check ü ü ü ü
H
H
.
H
.
H
H
Date
Installer Check ü ü ü ü
H
H
H
H
H
Date
35
Advertisement
Table of Contents
