Table of Contents
Advertisement
Installing Multiplexers
Enabling Alarms for Systems Using an HXU-358 Multiplexer
Step
Procedure
1
From the Shelf Options screen, press
appears:
Which Line Unit do you want to change the alarm settings
on (1-28). (E)nable All, (D)isable All
2
Type the slot number of the line unit you want to enable. When you type a slot number (x), one of
the following prompts appears.
Do you want to ENABLE alarm settings for Line Unit x (Y/N)
Do you want to DISABLE alarm settings for Line Unit x
(Y/N)
3
Press an appropriate
4
If you plan to install a test card, proceed to
If you plan to install a cut-through card, proceed to
on page
77.
The Wideband 3190 should now be operational. If you experience any difficulties at this time, refer
to
"Troubleshooting and System Testing" on page
? ? ? ?
Installer Signature
70
A
to select Alarm Management. The following prompt
Y
N
or
response for the alarm setting you are changing.
"Installing a Test Card (HTC) (Optional)" on page
"Installing a Cut-through Card (HCC) (Optional)"
74.
January 12, 2001
LTPH-SM-1014-03, Issue 3
Installer Check ü ü ü ü
H
H
H
H
76.
Date
HMS-358 List 1 and List 2
Advertisement
Table of Contents
