Table of Contents
Advertisement
Installing a Management Unit (HMU)
C
ONFIGURING THE
Be sure to have an IP address ready. It is required during HMU configuration (for more
information on IP addressing, refer
Once the HMU has been installed in the shelf, you need to complete the following basic configuration steps:
•
Setting the HMU date and time stamp for all alarms and reporting
•
Setting up a Shelf Identifier (SID) for each shelf for on-screen displays
•
Setting the Local IP address
•
Setting the Ethernet connection for HXU-357 multiplexers only
If you forget your password, contact ADC customer service (see
Support" on page
practice.
Step
Procedure
The following procedure assumes proper TAO login.
For proper login procedure, please refer to
page
1
From the Network Status screen (for multishelf configurations only), enter the number of the desired
shelf (1 through 32), and then press
The user-assigned chassis name must be used for proper shelf identification.
A descriptive naming plan must be developed and implemented.
2
From the Shelf Status screen, press
3
Proceed to
"Setting the HMU Date and Time (Option H)" on page
? ? ? ?
Installer Signature
TAO times out after a period of inactivity. Enter
34
M
ANAGEMENT
(page
36)
94). For more information about passwords, refer to the HMU technical
32.
ENTER
.
O
to select Shelf Options.
January 12, 2001
U
NIT
"Network Specifications" on page
(page
(page
"Using the Terminal Access Option" on
35.
TAO
to return to the TAO screen.
LTPH-SM-1014-03, Issue 3
82).
35)
(page
35)
36)
"Appendix C - Product
Installer Check ü ü ü ü
Date
HMS-358 List 1 and List 2
H
H
H
Advertisement
Table of Contents
