Table of Contents
Advertisement
LTPH-SM-1014-03, Issue 3
Step
Procedure (Continued)
3
Connect the other end of the cable to the BNC adapter on the back of the second shelf in the series.
4
Connect each shelf to the next shelf in a series as described in
Install a standard 50 Ω termination on the unused side of the BNC adapter on the first and the last
5
shelves in the series.
6
Connect a terminal to the HMU-319 craft port or to the OSS port (J30) on any of the shelves in the
network.
7
Proceed to
"Installing a Management Unit (HMU)" on page
? ? ? ?
Installer Signature
HMS-358 List 1 and List 2
Step 1
through
30.
January 12, 2001
Setting Up a 10BASE-2 Configuration
Installer Check ü ü ü ü
Step
3.
Date
H
H
H
H
H
29
Advertisement
Table of Contents
