General Operation - Hall Technologies HSM-88-4K User Manual

3.2 General Operation

3.2.1 Front Panel Functions
The front panel can be used for the following purposes:
•
View current input/output routings (ties) on LCD
•
Make new ties either starting from input or from output
•
Recall or Save Preset patterns
•
Lock or Unlock the front panel
•
Change EDID configuration
•
View EDID configuration and preset configuration on LCD
•
Monitor & Control Power On/Off status
All of the front panel buttons have built-in LEDs to help with their operation.
Front panel functions are designed for maximum intuitiveness. With just a
little practice, one can easily learn to monitor and control the matrix.
LOCK is used to disable all the keys on front panel. Lock the front panel
by pressing LOCK button. Hold the same button for 3 seconds to unlock the
panel. Locking the front panel is intended to prevent inadvertent actions for
example, if the buttons are pressed unintentionally. Note that when the front
panel is locked, the IR remote function is also locked, but other means to
control the matrix (RS-232 and IP) are still functional.
3.2.2 Front Panel Operation
The front panel pushbuttons have LEDs built-in. The buttons can be off, on, or
blinking. These modes help users control the matrix with ease.
Front Panel
© Copyright 2018 Hall Technologies.
5