Table of Contents
Advertisement
4.0 EDID Management
The HSM-88-4K gives users the flexibility to configure the EDID for each
input. The source for the EDID data associated with each input can be from
one of 15 standard built-in choices or copied from any of the TVs connected
to a particular output. There is also an advanced mode for dynamic "on-the-
fly" EDID Computation to guarantee that all displays connected to any input
will be able to display the video from that input (as explained below in
Section 4.2).
By default, the EDID for all inputs are set to 1080p video with 2-channel audio
for maximum compatibility but users can easily change the EDID used at all
or any of the inputs.
4.1 EDID Configuration
This option allows the user to choose a specific EDID table and load it into
any selected input port on the matrix. HSM-88-4K comes with 15 common
EDIDs saved in its internal memory or you can copy the EDID of any TV
connected to outputs.
Press MENU and navigate to "EDID Config" and press SET.
Browse through the 15-different preset EDIDs or any of the eight
EDIDs of the current outputs.
Press SET to select the EDID.
Select an input to copy the EDID.
Press SET to load the EDID to selected input.
Note: If you decide to copy EDID from an output, but the EDID of the output is not valid
(for example if the output is disconnected), the Matrix does not modify the input EDID
and will display an error message.
Below are the choices of EDIDs under EDID Config menu:
Index
1
2
3
4
5
6
7
EDID Description
1080p Video, 2 Ch Audio
1080p Video, 5.1 Audio
1080p Video, 7.1 Audio
1080i Video, 2 Ch Audio
1080i Video, 5.1 Audio
1080i Video, 7.1 Audio
1080p 3D Video, 2 Ch Audio
© Copyright 2018 Hall Technologies.
11
Advertisement
Table of Contents
