Table of Contents
Advertisement
3.2.3 Reading the LCD routing configuration
Easy to understand routing information is displayed on the LCD. On the LCD
the input row changes but the output positions are fixed and never change.
In the above example, the routing configuration can be understood from the
output end as follows:
Output 1 is tied to Input 1
Output 2 is tied to input 1 and so on ...
3.2.4 Turning the unit on and off
Press the power button any time to turn ON the matrix. For safe operation, to
turn the unit OFF, you must hold the power button for 3 seconds.
3.2.5 Making AV Routing or "Ties" from the Front Panel
Hall Technologies products are designed with maximum usability in mind.
That's why the front panel allows users to initiate "ties" either from the
OUTPUT point of view or from the INPUT.
For most users it is more logical to initiate ties starting with the OUTPUT.
Think of it as: "I want OUTPUT 1 to get its video from INPUT 2" for example!
6
© Copyright 2018 Hall Technologies
Front panel button LED states
Advertisement
Table of Contents
