Hall Technologies HSM-88-4K User Manual page 10

3.3.3 Editing or Copying Presets
1. To edit a saved preset, press PRE button.
2. Hold the preset number you want to edit on the input button until you see
the prompt "Editing Preset #" on LCD.
3. Start changing the preset config from the output end just like making ties
from the output end. Holding an entry will clear the output. Unassigned
outputs will be blanked by default.
4. Press SET and select the preset number you want to copy. Note that you
can even copy the preset to the number you started editing.
5. Press SET again the save the new preset.
Example: Edit output 1 in Preset #1, which is saved in previous example and
saving it to preset #2
© Copyright 2018 Hall Technologies.
9