Care and maintenance
Before cleaning
■Besuretodisconnectthepowerplug.
Body, Front panel
Wipe with a soft wrung cloth.
(Installationandremoval→P.36)
Wiping with hard cloth may scratch the surface.
●
Wipe the power plug with dry cloth.
Front panel
●
T hefilterhasa"thick"and"thin"shaft.
Take care when installing it on the tray.
Anti-fungus assembly
Soaking.
●
See"Toremovethestubbornstains".
●
D o not scrub with a brush or disassemble
the anti-fungus assembly.
●
I nstall it into the tray groove so that it is level.
Note
●
T he anti-fungus assembly may have powder.
This is normal and it performs without problem.
●
T he anti-fungus agent will become smaller over time.
This is normal and it performs without problem.
●
T he anti-fungus agent has a peculiar smell. It is not harmful.
*1 Asthedirtinessvariesdependingonthewaterquality,maintenancemayberequiredevenwithinonemonthafter
the last maintenance. If it smells unpleasant or water in the tank decreases less than before, clean the tank.
44
●
Do not use the detergents or other
substances on the right.
●
Y ou can use the oxygen-based bleaching
agent only when cleaning the humidifying filter.
●
W hen using chemically treated cloth, follow
its instructions.
<about once a month>
Humidifyingfi lterset
Shaft (rear): thick
Shaft: thin
Shaft mount:
thick
Shift mount: thin
<about once a month*
(continued)
Tank
Wash with water.
●
S tubborn stains
→ S ee"Toremovethe
stubbornstains".
Floater
>
1
Anti-fungus
assembly
Tray
Tank / Tray /
Anti-fungus assembly
<every day>
Anti-fungus assembly
Tab
●
R emove while
pressing the tab.
●
R emove the tank,
and pull out the tray.
Tray
<about once a month*
Remove the anti-
fungus assembly,
wash with water.
●
W ipe the dirt in details with
cotton swab or toothbrush.
●
D o not remove the floater
(polystyrene foam).
→ I fitcomesoff(P.46)
●
S tubborn stains
→ S ee"Toremovethe
stubbornstains".
>
1