Pro-Form PRO-HIT H14 User Manual page 11

10. Attach the Front Cover (52) to the Left and Right
Shields (50, 51) with six M4 x 16mm Flat Head
Screws (101); start all the Flat Head Screws,
and then tighten them.
11. Plug the Power Adapter (118) into the receptacle
on the front of the trainer.
Note: To plug the Power Adapter (118) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 12.
12. Make sure that all parts are properly tightened. Extra parts may be included. Place a mat beneath the
trainer to protect the floor.
10
11
11
101
52
101
50, 51
118