Karl Storz 11301 D1 Instruction Manual page 34

32
Hinweise zur
elektromagnetischen
Verträglichkeit (EMV)
Guidelines and manufacturer's declaration – electromagnetic emissions
The LED battery light source, models 11301 D1, 11301 D3 and 11301 D4, is intended for use in the electromagnetic environment specified below. The
customer or user of the LED battery light source, models 11301 D1, 11301 D3 and 11301 D4, should ensure that it is used in such an environment.
RF emissions as per CISPR 11
RF Emissions as per CISPR 11
Harmonic emissions as per IEC 61000-3-2
Voltage fluctuations/flicker Emissions as per
IEC 61000-3-3
a These tests are not applicable as the device does not have a connecting cable.
Information on
electromagnetic
compatibility (EMC)
Table 4
Group 1 The LED battery light source, models 11301 D1, 11301 D3 and 11301 D4, uses RF
energy only for its internal function. The customer or user of the LED battery light
source, models 11301 D1, 11301 D3 and 11301 D4, should make sure that it is used
in such an environment. Therefore, its RF emissions are very low and are not likely to
cause interference in nearby electronic equipment.
Class B The LED battery light source, models 11301 D1, 11301 D3 and 11301 D4, is suitable
for use in all establishments including domestic establishments and those directly
not
connected to the public low voltage power supply network that supplies buildings used
applicable a for domestic purposes.
not
applicable a
Indicaciones sobre
compatibilidad
electromagnética (CEM)