Advertisement
6. Seal the exhaust valve
• Turn the exhaust valve closed to create pressure. For manual exhaust, turn it to the
exhaust position.
• Ensure the floater valve drops down before turning on.
Sealing schematic diagram
Function Selection
1.
Turn on. If the buttons are inoperable, check the lid is closed properly.
2.
Select the required function: press one of the pre-set buttons to select the desired
function. If using the manual setting, press the "+"/"-" button to adjust the cooking
time.
3.
After selecting the preset or manually setting the cooking time, press the "Start"
button. The LCD display will begin to spin indicating the pressure cooker is
building up pressure. Once pressurised the timer will display and the food will begin
cooking.
4.
After cooking, the cooker will automatically enter into the keep warm state. After
cooking, the indicator of the corresponding function will switch off and the keep
warm indicator turns on. The cooker will emit a sound and enters into the keep
warm state. When in the appliance is in standby, press the "Keep Warm" button, 10
seconds later or press the "Start" button, the keep warm and start indicator lights
on, the cooker makes sound and enters into the keep warm state.
Tips:
• Under any state, press the "Cancel" button to cancel the current operation state and
return to standby state.
• A low clunking sound is normal during operation
• When cooking a small amount of food, the inner pot may be lifted when opening the lid:
shake it gently to detach.
Exhaust schematic diagram
17
Advertisement
