Water Flow Adjustment - Gentec TFT8000 Installation Manual

WATER FLOW ADJUSTMENT

This option is suitable for the following references: TFT8000, TFT8050,
TFT8050UR
To adjust the water flow:
1. Unscrew the top cap (6) (7)
2. Remove the locking screw (8A) and adjust the flow with adjustable screw (8B) using a
3mm Allen key.
3. Screw the top cap (6) (7) back.
Do not remove the
water control screw
(8B) from the body
• Turning the screw clockwise will reduce
the water flow.
*Regular service must be carried out on the product to avoid product failure.
www.gentecaustralia.com.au
• Turning the screw anti clockwise will
increase the water flow.
13