Job Cost Mode - Lathem 7000E User Manual

Job Cost Mode

This mode is basically the same as Payroll Mode, but has no pay period. After punching 64
times, the end sign appears.
If you want to reset the card manually without removing the cover, you must select "Reset is
YES".
Example
Card "Reset" is YES.
Job cost
mode
23
MODE
FUNCTION CHANGE SET
MODE
FUNCTION CHANGE SET
Card "Reset"
is YES
MODE
FUNCTION CHANGE
SET
1
Push the FUNCTION button for 3
seconds and position the " " under
the "MODE" mark.
Set the "Mode".
2
Push the CHANGE button to set the
left-side number at "5" and then push
the SET button. At that moment, the
display will change to the right-side
number.
Set the card "Reset".
Card "Reset"
1 No
2 Yes
3
In this case, push the CHANGE
button to set at "2" and then push
the SET button.
4
Push the SET button once again.