Safety Information; Laser Safety; Laser Notice - Kyocera FS FS-3900DN Operation Manual

Safety Information

Laser Safety

Laser Notice

Radio Frequency Transmitter
Radio Tag Technology
x
This printer is certified as a Class 1 laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation
Performance Standard according to Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce
hazardous laser radiation. Since radiation emitted inside the printer is
completely confined within protective housings and external covers, the
laser beam cannot escape from the printer during any phase of user
operation.
This printer is certified in the U.S. to conform to the requirements of DHHS
21 CFR Subchapter for Class I (1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC
825.
DANGER:
CLASS 3B LASER RADIATION WHEN OPEN. AVOID
DIRECT EXPOSURE TO BEAM.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
This machine contains the transmitter module. We, the manufacturer
(Kyocera Corporation) hereby declare that this equipment (page printer),
models FS-2000D/FS-3900DN/FS-4000DN are in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/
EC.
In some countries the radio tag technology used in this equipment to
identify the toner container may be subject to authorization and the use of
this equipment may consequently be restricted.
OPERATION GUIDE