Storage Error Codes - Kyocera FS FS-3900DN Operation Manual

Storage Error Codes

OPERATION GUIDE
Microdrive Errors
Code
Microdrive format error. If this error recurs even if the power has been
01
turned off and then on, reformat the Microdrive.
The disk system is not installed. Recheck the requirements for using the
02
system and the devices.
There is no available Microdrive space. Delete unnecessary files, etc.,
04
in order to free up space.
The specified file does not exist in the Microdrive.
05
There is no memory available to the Microdrive system. Increase the
06
available memory.
Formatting is not possible because host data is being spooled on the
10
Microdrive. Wait until the Microdrive is ready, and then format.
VMB: Alias error. The alias setting was lost, or the virtual tray
85
corresponding to the alias does not exist. Set the alias again.
The number of permanent code jobs that can be stored reached the limit
97
value, and no more can be saved. Either delete some unnecessary
jobs, etc., or increase the limit.
An unreadable page was found in a job (The job is damaged.).
98
A print job for the specified ID does not exist in the Microdrive.
99
CompactFlash Card/USB memory Errors
Code
The printer does not support the CompactFlash card inserted.
01
The CompactFlash card is not installed.
02
The CompactFlash card is full and cannot hold further data. Purge
04
unnecessary files or use a new CompactFlash card.
Specified file is not on the CompactFlash card/USB flash memory.
05
Insufficient printer memory to support the CompactFlash card system.
06
Expand printer memory.
Meaning
Meaning
Troubleshooting
4-9