Rps Power Supply (Optional); Fixed Ports Specifications; Console Port - HP A-F1000-E Installation Manual

RPS power supply (optional)

The redundancy power supply (RPS) can provide power supply to ensure continuous system operation for
a short period when the system power supply fails.
Table 20 RPS specifications
Item
Rated output voltage
Maximum output current
Maximum output power

Fixed ports specifications

Table 21 Fixed ports specifications
Item
Console ports
AUX ports
USB ports
Combo interfaces

Console port

The A-F1000-E firewall provides an RS-232 asynchronous serial console port that can be connected to a
computer for system debugging, configuration, maintenance, management, and host software loading.
Table 22 Technical specifications for the console port
Item
Connector
Compliant standard
Baud rate
Transmission distance
Services
Specifications
1, speed 9600 bps (default) to 115200 bps
1, speed 9600 bps (default) to 115200 bps
2 (USB 0—host mode, type A, USB 1—device mode, type B)
USB ports are hardware provided. They are not supported by software.
4 (copper ports GE0 to GE3, fiber ports SFP0 to SFP3)
The default working port of a combo interface is the copper port.
Specification
RJ-45
RS-232
9600 bps to 115200 bps
9600 bps (default)
≤15 m (49.21 ft)
•
Provides connection to an ASCII terminal
•
Provides connection to the serial port of a local PC to run the terminal emulation
program
•
Command line interface (CLI)
49
Specification
12 V
14 A
168 W