Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Homestyles Manuals
  4. Indoor Furnishing
  5. Storage Island 20 05520 0923
  6. Manual

Homestyles Storage Island 20 05520 0923 Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
IMPORTANT
Part List
B.
Rail
2 pcs.
E.
Bottom
1 pc.
I.
Shelf
3 pcs.
Hardware List
Hex Wrench
Cam Lock
1 pc.
30 pcs. (+6 extra)
Small Hex Wrench
Cam Lock Screw
1 pc.
30 pcs. (+2 extra)
Cartons 20 05520 0921 and 0922 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/16" Drill Bit, 3/8" Drill Bit
20 05520 0923
Storage Island
C.
Rail
3 pcs.
Flat Washer
12 pcs. (+1 extra)
Adjustable Pin
12 pcs. (+1 extra)
J.
Drawer
1 pc.
K.
Drawer
3 pcs.
Refer to later page(s) of these instructions for drawer assembly.
M6x32
Spring Washer
Head Cap Bolt
12 pcs. (+1 extra)
12 pcs. (+1 extra)
M3 x
.5 32
M4x16
Wood Screw
Machine Screw
4 pcs. (+1 extra)
8 pcs.
F.
Plinth
2 pcs.
Handle
4 pcs.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Storage Island 20 05520 0923 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Homestyles Storage Island 20 05520 0923

Summary of Contents for Homestyles Storage Island 20 05520 0923

  • Page 1 20 05520 0923 Storage Island IMPORTANT Part List Rail Rail Plinth 2 pcs. 3 pcs. 2 pcs. Bottom Drawer 1 pc. 1 pc. Shelf Drawer 3 pcs. 3 pcs. Refer to later page(s) of these instructions for drawer assembly. Hardware List M6x32 Spring Washer Flat Washer...
  • Page 2 Assembly Instructions 2/8 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
  • Page 3 Assembly Instructions 3/8 STEP 2 Attach Back Panel (D) to Bottom (E) with Cam Locks. (See Figure 2) Attach Plinths (F) to unit with Cam Locks. Cam Lock Figure 2 Wood Screw Flat Washer Spring Washer Head Cap Bolt STEP 3 Attach unit form Step 2 to Side Panel (H) with Flat Washers, Spring Washers, Head Cap Bolts...
  • Page 4 Assembly Instructions 4/8 Wood Screw STEP 4 Attach Side Panel (G) to unit with Cam Locks, Flat Washers, Spring Washers, Head Cap Bolts and Wood Screws, tightening bolts only halfway. Cam Lock Turn unit to it’s Flat Washer upright position. Spring Washer Head Cap Bolt Adjustable Pin...

  • Page 5: Part List

    Assembly Instructions 5/8 Drawer (J) STEP 6 Attach Drawer Sides (J3) and (J4) to Drawer Back (J2), then flip Locks. (See Figures 4 and 5) Lock Figure 4 Figure 5 STEP 7 Slide Drawer Bottom (J5) into groove. Attach Drawer Front (J1) to unit, then flip Locks.
  • Page 6 Assembly Instructions 6/8 Drawer (K) STEP 9 Lock Attach Drawer Sides (K3) and (K4) to Drawer Back (K2), then flip Locks. STEP 10 Slide Drawer Bottom (K5) into groove. Attach Drawer Front (K1) to unit, then flip Locks. Lock Machine Screw STEP 11 Attach Handle with Machine Screw.
  • Page 7 Assembly Instructions 7/8 Flat Washer Spring Washer Head Cap Bolt Cam Lock STEP 12 Attach Top (A) to unit with Cam Locks Flat Washer, Spring Washer and Head Cap Bolts, tightening bolts only halfway. STEP 13 Level unit by adjusting the adjustable levelers on bottom of unit.

  • Page 8: Hardware List

    Assembly Instructions 8/8 Per regulatory requirements, a Tip-over Restraint is included. Follow Step 14 to install it. STEP 14 Drill a 3/16” hole 1/2” deep 1” below top of unit in middle of side panel that is Anchor in wall Wall Screw Bracket 3/16”...
  • Page 9 CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.